⛑️ EMERGENCY RESCUE COIN TOKEN WALL ART・ STL File for 3D printing・Cults

🪙 SINGLE-SIDED INSTRUCTIONS
🖨️ Settings & Manufacturing Directions
Printer Compatibility
Any FFF/FDM printer with no less than a 40 × 40 × 5 mm construct quantity.

Nozzle & Mattress
Nozzle Diameter: 0.4 mm (or 0.25 mm for additional crisp particulars)

Mattress Floor: Glass, PEI, or BuildTak with glue stick or blue tape for dependable adhesion

Filament Suggestions
PLA: Greatest for effective element and simple printing

PETG: Extra sturdy, barely shiny end

ABS: For warmth resistance (enclosure beneficial)

Layer & Perimeter Settings
Layer Peak: 0.1–0.15 mm to seize effective 0.55 mm aid

Perimeters (Partitions): 3 shells for sharp edge definition

Infill & Speeds
Infill: 10–15% (gyroid or grid sample) for energy + materials financial savings

Print Pace: 30–50 mm/s (slower speeds yield crisper aid particulars)

Temperatures (Information)
Materials Nozzle °C Mattress °C Notes
PLA 200–205 55 For many purposes
PETG 235–240 70–75 Shiny, sturdy end
ABS 240–250 90–100 (encl.) For warmth resistance, enclosure beneficial

Orientation & Helps
Lay flat on the construct plate (aid going through up)

Helps: Not wanted for primary spherical coin geometry

📏 Scaling Pointers
This mannequin is designed at:

Diameter: 38.15 mm

Thickness: 3 mm

Aid Peak: 0.75 mm

When scaling uniformly in your slicer (X/Y/Z collectively), all dimensions, together with aid top, will scale proportionally. For instance, doubling the dimensions (200% scale) will make the aid top 1.1 mm.

✅ Adjusting Aid Independently:
If you wish to make the aid deeper or shallower with out altering the coin’s diameter, alter the Z-axis scale individually in your slicer. For example:

150% Z-scale: Will increase aid depth by 50%

100% X/Y, 200% Z: Doubles the aid with out altering diameter

🛡️ At all times preview your sliced mannequin earlier than printing to make sure it meets your wants.

🛠️ Put up-Processing
Calmly sand edges and aid peaks with 400-grit sandpaper for a clear end.

Apply primer or filler-primer to reinforce effective particulars earlier than portray.

For a metallic look: take into account metal-leafing or metallic spray paint.